| # | ID | Title |
| 1 | D2-AM1-C | Single Photodiode Detection for Interference Elimination in SAC-OCDMA Systems |
| 2 | D2-AM2-C | Widely Tunable Multiwavelength Hybrid Brillouin-erbium Fiber laser utilizing Virtual Mirror |
| 3 | D2-AM2-C | Graphene based Q-Switched Tunable and Switchable S-Band Fiber Laser |
| 4 | D1-PM1-C | Wireless Signals Transport Schemes in Fiber Wireless Systems |
| 5 | D1-AM2-A | Ozone Sensor for a Publishing House |
| 6 | D1-AM2-A | Plastic Optical Fibre Physiological Bending Sensor based on Fibre Tilt Angle Loss Measurement |
| 7 | D1-AM2-B | Impact of Auger Recombination on Hybrid Green Light-Emitting Diode |
| 8 | D1-AM2-B | Enhanced Analysis of NPLAY structures via Coupled Dipole Method |
| 9 | D1-AM2-C | Influence of Anisotropic Raman Gain on Four- Wave Mixing Signals |
| 10 | D1-AM2-B | Laser Ablation Synthesis of Silver Nanoparticle in Graphene Oxide and Thermal Effusivity of Nanocomposite |
| 11 | D2-AM2-B | Spectroscopic characterization of a 2.3µm GaInAsSb-based VCSEL structure |
| 12 | D1-AM2-C | Study on the Performance of Slotted and non-slotted Optical Burst Switched Networks |
| 13 | D1-AM2-B | Performance Analysis of Gallium Lanthanum Sulfide and Cuprous Oxide as Nanoplasmonic Couplers |
| 14 | Tomography | The Application of Optocoupler IC for Secure Control and Noise Reduction in Magnetic Induction Tomography Receiver Circuit |
| 15 | D1-PM1-B | Study of the Guided Mode Confinement Width of the Gap Surface Plasmon Polariton Waveguide |
| 16 | D1-PM1-B | Surface Plasmon in Slab Waveguide: A Verification Test-Bed |
| 17 | D3-AM1-C | High speed low noise InAs electron avalanche photodiodes for telecommunication and infrared sensing applications |
| 18 | D2-AM2-C | Impact of Four Wave Mixing on OSNR of Multiwavelength Brillouin-Erbium Fiber Laser |
| 19 | D1-PM1-C | Performance of a 16×2.5 Gbps WDM System Transmitting over FSO Medium |
| 20 | D1-PM1-B | Numerical Modeling and Analysis of CdS/Cd(1-x) Zn(x ) Te Solar Cells as a Function of CdZnTe Doping, Lifetime and Thickness |
| 21 | D3-AM1-B | Frequency modulation optimization of nonlinear optical Z-scan by high repetition rate femtosecond laser |
| 22 | D1-PM1-C | Experimental Demonstration of a Downlink Remote Optical Local Oscillator for Radio over Fiber System |
| 23 | D1-AM2-C | Centralized Monitoring and Fault localization for Passive Optical Network |
| 24 | D2-AM1-C | Weight Optimization of Variable Weight OCDMA for Triple-Play Services for Triple-Play Services |
| 25 | D1-AM2-A | Direct Optimization of Y-Branch Silicon Nitride Optical Waveguide for Evanescent Field Biosensor |
| 26 | D1-AM2-A | Raman Mapping Studies of Human Ectocervical Tissue |
| 27 | D2-AM1-A | Performance Comparison of OCDMA Codes for Quasi-distributed Fiber Vibration Sensing |
| 28 | D2-AM1-A | Sensing Range Assessment of Optical Fibre Physiological Bending Sensor |
| 29 | D2-AM1-A | Fabrication and Evaluation of Surface Plasmon Resonance Optical Sensor for Heavy Metal Ions Detection |
| 30 | D3-AM2-C | Mitigation of FWM Crosstalk in WDM System Using Polarization Interleaving Technique |
| 31 | D2-AM1-C | New Dynamic Technique for SAC-OCDMA System |
| 32 | D3-AM2-C | Self-homodyne coherent OFDM packet transmission without carrier frequency or common phase error estimation |
| 33 | D1-PM1-B | Temperature tuning of band edge resonant modes in one-dimensional photonic crystals |
| 34 | D1-PM1-B | A dynamic optically reconfigurable gate array using a blue laser |
| 35 | D3-AM2-C | Investigation of Performance of 3LCDM over high speed optical fiber |
| 36 | D2-AM1-A | Raman Spectroscopic Characterization of Blood Plasma of Oral Cancer |
| 37 | D3-AM1-B | Multiwavelength Brillouin-Raman Fiber Laser Utlizing Linear and Ring Cavity Stracures: A Comparative Study |
| 38 | D1-PM1-B | Injection Locked VCSEL Based Oscillator (ILVBO) |
| 39 | D1-PM1-B | Far-field radiation pattern of the vertical light-emitting diodes with SiO2 nano-extractor |
| 40 | D2-AM1-A | Application of Infrared Sensor for Shape Detection |
| 41 | D2-AM2-A | Enhancement of Fiber-SPR Sensor utilizing Graphene Oxide |
| 42 | D3-AM1-B | Investigation of Continuously Adjustable Extinction Ratio in a Multiwavelength SOA Fiber Laser based on Intensity Dependent Transmission Effect |
| 43 | D3-AM1-B | Multiwavelength Brillouin-Raman Fiber Laser Utilizing Enhanced Nonlinear Raman Amplified Loop Mirror Design |
| 44 | D1-PM1-B | Optical Emission Spectroscopy Study on Deposition Process of Silicon Carbide Thin Films |
| 45 | D3-AM1-B | Impact of Passive EDF Length on the Performance of Linear Cavity BEFL |
| 46 | D2-AM2-A | Combination of Walsh and Golay codes in modulating the pump light of phase-shift pulse BOTDA sensor |
| 47 | D2-AM2-A | Simultaneous Vibration and Humidity Measurement Using a Hybrid WDM/OCDMA Sensor Network |
| 48 | D2-AM1-C | Encoder-Decoder Design for SAC-OCDMA using Flexible Cross Correlation (FCC) Code Algorithms |
| 49 | D1-PM1-C | Outage analysis of Relay-Assisted Free Space Optical Communication Systems |
| 50 | D2-AM1-C | Beat Noise Mitigation through Spatial Multiplexing in Spectral Amplitude Coding OCDMA Networks |
| 51 | D3-AM1-C | Impact of Reflections and ISI on the Throughput of TCP over VLC Networks with ARQ-SR Protocol |
| 52 | D1-PM1-C | BER Analysis of All-Optical AF Dual-Hop FSO Systems over Gamma-Gamma Channels |
| 53 | D1-PM1-B | Coupling Loss Analysis in Fiber Tip Lens and Micro Fabry Perot Multiplexer and Demultiplexer Connection |
| 54 | D3-AM1-C | All-Optical Noise Cleaning Based on Co-Propagating Lossless Polarization Attraction |
| 55 | D1-PM1-B | Polymer Optical Fiber Fabrication Using Chemical Etching and Lapping Technique |
| 56 | D3-AM1-B | Effect of EDF position on the performance of Hybrid Dispersion-Compensating Raman/EDF Amplifier |
| 57 | D3-AM1-B | Cascading Raman Lasers for Reducing their Threshold |
| 58 | D2-AM1-B | Comparative Study of Natural Anthocyanins Compound as Photovoltaic Sensitizer |
| 59 | D3-AM1-C | BER Evaluation for 3x3 Reconfigurable Multi-Wavelength Bidirectional Optical Cross-Connect |
| 60 | D2-AM1-B | Evanescent Field Maximization of Linear Silicon Nitride Channel Waveguide |
| 61 | D2-AM1-C | Selective Mode Excitation in SCM-OCDMA |
| 62 | D2-AM2-A | Fiber Bragg Grating Strain Sensor Validation in Metallic Structures |
| 63 | D3-AM1-C | Multi Slot Amplitude Coding Performance Improvement with Level Spacing Optimization |
| 64 | D3-AM1-C | Frequency Domain Chromatic Dispersion Equalization by Fast Block Normalized Least Mean Square for 64-QAM Optical Coherent Receiver |
| 65 | D2-AM2-C | Spectrum-Controlled LED System for Light Quality Testing |
| 66 | D2-AM2-C | Superresolution imaging in synthetic aperture digital holographic microscopy |
| 67 | D3-AM1-B | Flexible pulse-width tunable 1.06mm pulsed laser source utilizing a FPGA based waveform generator |
| 68 | D2-AM2-A | Optical properties of GeO2 doped silica preform from absorption and vibrational spectroscopy |
| 69 | D2-AM1-C | Performance Evaluation of 2-D Hybrid Code vs 2-D M-Matrices Code in SAC-OCDMA Systems |
| 70 | D2-AM1-B | Effects of High Neutron Fluence on The Electrical Characteristics of InAs Quantum Dot Structures |
| 71 | D2-AM1-B | 12-channel Tapered SOI-based AWG for CWDM System |
| 72 | D3-AM1-B | Investigation on Bandwidth of Tunable Bandpass Filter in Linear Multiwavelength BEFL |
| 73 | D3-AM1-C | Innoval Zero Cross Correlation for Spectral Power Density Efficiency |
| 74 | D3-AM2-B | Generation of Transform-Limited Picosecond Pulses at 1.0µm from a Gain Switched Semiconductor Laser Diode |
| 75 | D2-AM1-B | Voltage-Controlled All-Polymer Reconfigurable Optical Power Splitter |
| 76 | D1-PM1-C | Visible Light Communications Localization using TDOA-Based Coherent Heterodyne Detection |
| 77 | D1-AM2-C | Stacked TDM-PON with Colorless ONU for NG-PON |
| 78 | D3-AM2-B | High-Speed Distributed-Feedback Lasers with Nanoscale Surface Gratings |
| 79 | D3-AM1-C | Performance Evaluation of 8 Channel CWDM System with Cascaded SOAs |
| 80 | D3-AM2-B | Tapered double-clad optical fibers application for high power lasers and amplifiers |
| 81 | Tomography | The Development of Hardware for Optical Tomography System |
| 82 | D1-PM1-C | Optimization of Remote Seeding Source and Gain in Minimizing Backreflections Effects on Colorless ONU in 10 Gbps Bidirectional WDM PON System |
| 83 | D3-AM2-A | Simulation of Nanoparticle Enhanced Diffraction Grating Biosensor using DDA |
| 84 | D2-AM1-B | Aluminum Doped Silica Preform Fabrication using MCVD and Solution Doping Technique: Effects of Aluminum Solution Concentration |
| 85 | D2-AM1-B | Reflectance Response of Optical Fiber Sensor Coated with Graphene Oxide towards Ethanol |
| 86 | D3-AM2-A | Tapered Multimode Fiber Sensor for Ethanol Sensing Application |
| 87 | D3-AM2-A | Performance of TEOS/Octyl- Triethoxylane/Triton x-100 on Tris(4,7'- diphenyl-1,10'-phenanthroline) Ruthenium (II) Sol-gel for fluorescence-based optical sensor |
| 88 | D3-AM1-C | Secure Communication with Practical Two Way Quantum Key Distribution Protocol and Weak+Vacuum Decoy State |
| 89 | D2-AM2-B | Effect of GeCl4/SiCl4 Flow Ratio on Germanium Incorporation in MCVD Process |
| 90 | D3-AM2-B | Design and Performance of an S-band Thulium doped Modified Silica Fiber Amplifier |
| 91 | Dosimeter | Thermoluminescence Response of Ge-doped Optical Fiber Dosimeters with Different Core Sizes |
| 92 | D2-AM2-B | Mesoscopic particles with resonant and anti-resonant optical properties in microfluidics |
| 93 | D2-AM2-B | Apparent Uniform of Light Emission From Multiple Spot Sources |
| 94 | D2-AM2-B | Effect of Gold nanoparicles with laser in MDCK cell lines |
| 95 | D1-PM1-C | Transimpedance Amplifier with Automatic Bandwidth Compensation Technique for Large Window Optical Front-End Receiver |
| 96 | D3-AM2-B | Half-Opened Cavity Random Distributed Feedback Laser with FBG Wavelength Variation |
| 97 | D3-AM2-A | Characterisation of a Polymeric Electro-optic Phase Modulator for Sensing Applications |
| 98 | D3-AM2-A | Performance evaluation of optical fiber sensor using different oxygen sensitive nano-materials |